PROJ-FILE-FMT=2
PROJ-DRIVER-NAME='Epson EMP-7800 (Rev F).prj'; No material changes from Rev E, incremented revision for Application Note format update -- BT
PROJ-NAME='Epson EMP-7800'
PROJ-DRIVER-REV='Rev F'

DOC-INSTALLATION-NOTE[1]="The Epson EMP-7800 projector MUST be configured to STANDBY MODE: NETWORKING ON in the projector onscreen menu ADVANCED1. If the projector STANDBY MODE is not configured to NETWORKING ON, the projector may stop responding to RS-232 control. If the projector does stop responding to RS-232 control, it must be powered off and unplugged to restore RS-232 control.Please see the Epson EMP-7800 Application Note for more information, or contact SP Controls Technical Support."

DOC-INSTALLATION-NOTE[2]="SP Controls recommends the use of this driver, but if you are unable to set the projector to STANDBY MODE: NETWORKING ON, an IR-Only version of this driver (Revision C) is also available."


IR-TIME-0L=420u
IR-TIME-0H=315u
IR-TIME-1L=695u
IR-TIME-1H=315u
PROJ-BAUD-RATE=9600,8,N,1
IRCODE['_REPEAT']=""
IRCODE['_PREFIX']=""
IRCODE['_SUFFIX']=""
RSCODE['COMPUTER (VGA)']="'SOURCE 10',13,D725m",REPEATS=1,IS-SELECTION
RSCODE['DVI']="'SOURCE 30',13,D725m",REPEATS=1,IS-SELECTION
RSCODE['VIDEO (RCA)']="'SOURCE 41',13,D725m",REPEATS=1,IS-SELECTION
RSCODE['S-VIDEO']="'SOURCE 40',13,D725m",REPEATS=1,IS-SELECTION
RSCODE['BNC (RGB-ANALOG)']="'SOURCE B1',13,D725m",REPEATS=1,IS-SELECTION
RSCODE['BNC (RGB-VIDEO)']="'SOURCE B2',13,D725m",REPEATS=1,IS-SELECTION
RSCODE['YCbCr (BNC)']="'SOURCE B3',13,D725m",REPEATS=1,IS-SELECTION
RSCODE['YPbPr (BNC)']="'SOURCE B4',13,D725m",REPEATS=1,IS-SELECTION
RSCODE['POWER ON']="'PWR ON',13,10",REPEATS=1
RSCODE['POWER OFF']="'PWR OFF',13,10",REPEATS=1
RSCODE['VOL +']="'VOL INC',13,10"
RSCODE['VOL -']="'VOL DEC',13,10"
RSCODE['POWER POLL']="'PWR?',13",REPEATS=1
RSCODE['MENU']="'KEY 03',13",IS-HIDDEN
RSCODE['ESC']="'KEY 05',13",REPEATS=1,IS-HIDDEN
RSCODE['ENTER']="'KEY 16',13",REPEATS=1,IS-HIDDEN
RSCODE['ADJ UP']="'KEY 35',13",IS-HIDDEN
RSCODE['ADJ DOWN']="'KEY 36',13",IS-HIDDEN
RSCODE['ADJ LEFT']="'KEY 37',13",IS-HIDDEN
RSCODE['ADJ RIGHT']="'KEY 38',13",IS-HIDDEN
RSCODE['BRIGHT +']="'KEY 31',13",IS-HIDDEN
RSCODE['BRIGHT -']="'KEY 32',13",IS-HIDDEN
RSCODE['HELP']="'KEY 04',13",IS-HIDDEN
RSCODE['RESIZE']="'KEY 17',13",IS-HIDDEN
RSCODE['A/V MUTE']="'KEY 15',13",IS-HIDDEN
RSCODE['E-ZOOM +']="'KEY 28',13",IS-HIDDEN
RSCODE['E-ZOOM -']="'KEY 29',13",IS-HIDDEN
RSCODE['SYNC +']="'KEY 23',13",IS-HIDDEN
RSCODE['SYNC -']="'KEY 24',13",IS-HIDDEN
RSCODE['TRACKING +']="'KEY 25',13",IS-HIDDEN
RSCODE['TRACKING -']="'KEY 26',13",IS-HIDDEN
BYTES-TO-QUEUE=2
POWER-POLL-INTERVAL=7.05s
POWER-POLL-TIMEOUT=2.82s
POWER-POLL-THRESHOLD=5
POWER-POLL-STARTBYTE=6
POWER-POLL-MATCH-ANY=False
POWER-POLL-MATCH-BYTES="'PWR=01'"
POWER-POLL-TESTBYTE-MASK=255
POWER-POLL-DURING-WARMUP=False
POWER-POLL-DURING-LOCKOUT=False
PROJ-USES-ABSOLUTE-VOL=False
VOL-MUTE=0
VOL-RANGE=255
VOL-FLOOR=0
IO-DOWNTIME=878m
WARM-UP-DELAY=60s
POWER-ON-DELAY=52s
DEFAULT-LOCKOUT=42s
IO-CANCEL-DOWNTIME-ON-RX=False
USE-MODULATION-WHEN-WIRED=False
INVERT-LINE-WHEN-WIRED=False
CARRIER-PERIOD=26.8u
CARRIER-DUTY-CYCLE=50
PROJ-MISSING-THRESHOLD=5
DEFAULT-CORE-FUNCT[REPEAT]='_REPEAT'
DEFAULT-CORE-FUNCT[PREFIX]='_PREFIX'
DEFAULT-CORE-FUNCT[SUFFIX]='_SUFFIX'
DEFAULT-CORE-FUNCT[POLL]='POWER POLL'
DEFAULT-CORE-FUNCT[ON]='POWER ON'
DEFAULT-CORE-FUNCT[OFF]='POWER OFF'
DEFAULT-CORE-FUNCT[VUP]='VOL +'
DEFAULT-CORE-FUNCT[VDN]='VOL -'
DEFAULT-SELECTION[1]='VIDEO (RCA)'
DEFAULT-SELECTION[2]='S-VIDEO'
DEFAULT-SELECTION[3]='YPbPr (BNC)'
DEFAULT-SELECTION[4]='COMPUTER (VGA)'
DEFAULT-HID-FUNCT[OFF]='MENU'
DEFAULT-HID-FUNCT[VUP]='ADJ UP'
DEFAULT-HID-FUNCT[VDN]='ADJ DOWN'
DEFAULT-HID-FUNCT[1]='ESC'
DEFAULT-HID-FUNCT[2]='ENTER'
DEFAULT-HID-FUNCT[3]='ADJ LEFT'
DEFAULT-HID-FUNCT[4]='ADJ RIGHT'
POWER-SENSE-OPTIONS=RS232Poll,None,Sensor
IR-WIRING-OPTIONS=
PASSIVE-MODE=False